Hopefully, this helps those of you who struggle with frequent staple jams. Have a Bostitch stapler you're unable to unjam? Contact us and we'll be happy to provide further assistance!
Posted in Product FAQ. The store will not work correctly in the case when cookies are disabled. Learn More. Desk Lamps Brighten up any space with modern, energy-efficient desk lamps that reduce eye strain, boost productivity and boast a variety of surprising features. Shop All Desk Lamps. Floor Lamps Looking for modern, free-standing lighting solutions? Shop All Floor Lamps. Contact Us. Product Registration. Support Documents. Safety Recall Info. Warranty Claims.
Home Blog How to Unjam a Stapler. So, how exactly do you unjam a stapler? The Process of Unjamming a Stapler: Unjamming a stapler can be tricky, especially if the staple is stuck in the magazine.
To start, open the stapler completely so that the top and bottom are in a horizontal line. Before attempting to use household objects, try giving the stapler a light shake to see if the staple will just fall out.
If this does not work, try using any sizable tool or nearby accessory, try to fish out the jammed staple through the "front teeth" of the stapler. A pencil usually does the trick! High-quality staplers are indeed designed with advanced technology so that it gives you smooth stapling.
Though jamming stapling machine is less likely to happen when it does, how are you going to fix it is a matter of concern. So, are you suffering from a jammed stapler? Are you unable to remove the stuck stapler pin from the machine? Here are the things you need to do:. Thankfully many stapling machine companies are manufacturing staplers with extraordinary design and features. Now, you can choose from manual to automatic staplers from a wide variety of staplers.
And some are even electronic staplers. For this, you can read the stapler instructions. There you will not only find ways to use the device but also what you should avoid damaging the machine and how to fix it. The good news is; you can remove jamming using the available tools you have at home. Following are the items you can use to remove jamming:.
Whether you are using an automatic or manual stapling machine, the machine can get stuck due to the pin. Sometimes as you press to staple, the pin may come out at the wrong angle. The machine gets jammed. This type of jamming is easy to fix. You need to open the top load magazine part first.
Since there are different types of staplers available, including front-loading, rear loading, bottom loading, and spring powered, the placement of the staple magazine section would vary.
Therefore, depending on the type of stapler you have, look for the magazine section and the misplaced pin. Then, manage something thin and sharp like a paper clip. Insert the clip from the bottom of the opening of the stapler and push up. As you do so, the pin will come out from the top.
Just place the tool slightly above the pin and push it down. The pin will come out easily. You can also use pliers as it has a sharp head with a magnetic end. You need to open the top part of the stapler. Then, hold the pin and remove it. Some manual staple guns have knobs. The pusher rod should slide right out. Next, remove the magazine. Find the screws on the bottom of the stapler and remove them to free the magazine that holds the staple strip.
Finally, use needle-nose pliers or a small flathead screwdriver to pull or pry out any jammed staples. Remove the stuck staples and check that you have the right size and type for your tool. Reassemble your tool by retracing your steps in reverse order and make sure you have secured the screws that hold the magazine and keep it from falling out while you are using the staple gun.
Instead, the front of the stapler may have a plate that reads Open with a downward pointing arrow. Aiming it away from yourself and anyone else , press the lever to eject the stuck staple, and then slide the front plate back on and hammer it in place, but be careful not to damage it or bend it, or it may not come off again.
First, take your hand off the trigger, switch the tool off, put the gun down, and step away. Now disconnect it from its power source. If it runs on a battery, take the battery off. If it is pneumatic, detach the hose.
0コメント